Author Archive

Sakurai MF-80

MF-80 Flat Bed Press (Manual/Automatic Feed)This Press can be fully automatic when the feeder is attached. Capable of printing on a 100-micron film to corrugated paper. Model: MF-80 Max. stock size (mm) 800 X 600(31 5/8 X 23 5/8″) Min. stock size (mm) 350 X 270(13 7/8 X 10 5/8″) Max. print size (mm) 800 […]

Double Maestro-102AII

Model: DMS-102AII Max. stock size (mm) 1,050 X 750(41 1/2 X 29 5/8″) Min. stock size (mm) 560 X 350(22 1/8 X 13 7/8″) Max. print size (mm) 0.1 – 0.8(0.004 – 0.032″) Running Spead (IPH) 400 – 2,000 External frame size (mm) 1,300 X 1,170(51 3/8 X 46 1/8″)1,280 X 1,140 (Option)(50 1/2 X […]

Dorn SPE DS-48 (Refurbished)

   Is your old Stacker not performing up to your standards? Call and ask about Sanjo Service’s Rebuild Program to get that old Stacker better than the day it was bought! Pictured: Optional Steel Plate for easy loading and unloading. *Or call us for replacement parts for your existing Stacker.       Optional colors […]

Sakurai Stacker

           This Stacker is set after the Screen printing dryer to continuously stack the products without damaging the printed surface in a quick and accurate manner.     Rigid frame construction of cast iron. Maximum speed of 3,600 sheets per hour. Stable conveyance by two kinds. (Total of 4 belts)   […]

Natgraph’s Automatic Stackers

  Natgraph’s Automatic Sheet Stackers have been developed over many years with 100’s of these units in daily use world-wide. Available in 7 standard sizes, There are also purpose built versions for high pile/high speed applications and special substrates.         Automatic Sheet Stackers  Continuous Operation Option CCTV Stack Monitoring Systems     […]


  The S.P.E. Inc. Descending Pile Stacker is intended solely for efficient stacking of most screen printed subtrates at high speeds.               – 24″ Pile Height – Overhead mirror with adjustable angle. – Heavy duty D.C. adjustable belt speed. – UL approved control panel. – Carts with caster wheels. […]

48″ UV Gas A/C Combo Dyer (used)

– (2) Lamp 200/300 watt Water Cooled UV Curing Unit – (2) 12′ Foot heat sections each with 1.5 Million BTU burners – (1) 10 Air conditioned cooling unit – New Conveyor 48″ wide – (2) New 48″ Mercury Vapor Lamps – New Reflective Sheeting – (2) New Temperature Controllers – 6 Month Warranty   […]

SC72A UV Line (used)

     The Sakurai SC72A Press / Dorn SPE Curing Unit has a minimum sheet size of 10″ 5/8 x 13″ 1/4 with a maximum sheet size of 20″ 1/2 x 28″ 5/16 with an Print speed IPH (Impressions Per Hour) of 900 to 3600.         30″ (2) Lamp “Starlit” Dorn UV Curing unit […]

Rebuilt Sakurai MS72A

A Rebuilt MS72A by Sanjo Service and Repair.

Printing Your Cylinder!?

A Stainless Steel Embossed Feedboard. With Three Point Registration Optical Sensors. Never Print On Your Cylinder Again!