Sanjo Service

Rebuilt Sakurai MS72A

A Rebuilt MS72A by Sanjo Service and Repair.

Printing Your Cylinder!?

A Stainless Steel Embossed Feedboard. With Three Point Registration Optical Sensors. Never Print On Your Cylinder Again!

NEW MS102A2 Sakurai!!!

New Stop Cylinder with Speeds up to 4,000 IPH!

Rear Pick-up Feeder

MS102AII Rear Pick-up Feeder 4,000 IPH

MF-80

Flat Bed Press (Manual/Automatic Feed)
This Press can be fully automatic when the feeder is attached. Capable of printing on a 100-micron film to corrugated paper.

Model:	MF-80
Max. stock size (mm)	800 X 600(31 5/8 X 23 5/8″)
Min. stock size (mm)	350 X 270(13 7/8 X 10 5/8″)
Max. print size (mm)	800 X 585(31 5/8 X 23 1/8″)
Running speed (IPH)	1,000
Stock thickness (mm)	0.1 – 3(0.004 – 0.12″)
External frame size (mm)	1,100 X 1,000(43 3/8 X 39 1/2″)
Dimensions(D x W x H)(mm)	2,918 X 1,330 X 1,260(202 1/4 X 63 1/8 X 54 3/4″)
Weight (kg)	2,300
Power (kW)	7.75

Automatic screen frame return to horizontalpositionBelt speed slow down device

Standard Equipment	Optional Equipment
Detachable feeder	Ink scraping return system
Gripper unit for substrate transportation	Cross-over stand
Pneumatic screen plate lock system	Static electricity reducer
Inverter control speed	Hickey picker roller unit
Air squeegee	Push guide (for thick substrate)
Bearing type pull side lay	Delivery fans
Front lay sensor	Digital indicator
Auto mode	Two stroke printing system
Sheet detector	Double sheet detector (mechanical & electronic)

Contact

Sales

Service

Parts

Chris Brown: 440-339-5853

Bobby Longendyke: 614-638-9027

Raymond Ponce: 562-922-1435 (Bilingual/Spanish)

Armando Maldonado: 626-679-5351 (Bilingual/Spanish)

Gail Hughes: 614-365-1518

Double Maestro-102AII

Sanjo Sales and Service

No Comments »

Model:	DMS-102AII
Max. stock size (mm)	1,050 X 750(41 1/2 X 29 5/8″)
Min. stock size (mm)	560 X 350(22 1/8 X 13 7/8″)
Max. print size (mm)	0.1 – 0.8(0.004 – 0.032″)
Running Spead (IPH)	400 – 2,000
External frame size (mm)	1,300 X 1,170(51 3/8 X 46 1/8″)1,280 X 1,140 (Option)(50 1/2 X 45″)
UV lamp output (W/cm)	Max 120
UV dryer belt speed (m/min)	5-50
Dimensions (D x W x H)(mm)	16,370 X 3,080 X 1,525(53’10 1/8″ X 10’1 5/8″ X 5′ 1/4″)
Power (kW)	130

Standard Equipment	Optional Equipment
Rear pick-up feeder	Front pick-up feeder
Pull/push convertible side lays (with detecting sensor)	Dripless squeegee
Cylinder built-in front lay sensor	Anti-static devices
Side lay sensor	Ultra sonic double sheet detector
Screen frame pneumatic lock clamp	Cleaning roller unit
Screen frame pull-out device	Cross over stand
Temporary stop quick adjustment device	Ink-supply device
Rebound stopper (Feeder / delivery side)	Movable rebound stopper (delivery side)
Embossing finish stainless plate in feed board	High pile version
Suction feed belt
Delivery board lowering system

Contact

Sales

Service

Parts

Chris Brown: 440-339-5853

Bobby Longendyke: 614-638-9027Raymond Ponce: 562-922-1435 (Bilingual/Spanish)

Armando Maldonado: 626-679-5351 (Bilingual/Spanish)

Gail Hughes: 614-365-1518

Dorn SPE DS-48 (Refurbished)

Sanjo Sales and Service

No Comments »

Is your old Stacker not performing up to your standards? Call and ask about Sanjo Service’s Rebuild Program to get that old Stacker better than the day it was bought!

Pictured: Optional Steel Plate for easy loading and unloading.

*Or call us for replacement parts for your existing Stacker.

Optional colors available per request.
Optional steel plate for quick loading and unloading.
Additional high volume air-blast for heavy substrates

Contact

Sales

Service

Parts

Chris Brown: 440-339-5853

Bobby Longendyke: 614-638-9027Raymond Ponce: 562-922-1435 (Bilingual/Spanish)

Armando Maldonado: 626-679-5351 (Bilingual/Spanish)

Gail Hughes: 614-365-1518

Sakurai Stacker

Sanjo Sales and Service

No Comments »

This Stacker is set after the Screen printing dryer to continuously stack the products without damaging the printed surface in a quick and accurate manner.

Rigid frame construction of cast iron.
Maximum speed of 3,600 sheets per hour.
Stable conveyance by two kinds. (Total of 4 belts)

Sakurai Pile Stacker PST Series

Model	PST 80	PST 104
Max. Stock size (mm)	800 x 550	1,020 x 740
Max. Pile Height (mm)	750	750
Air Required (L/min)	30	30
Dimensions L x W x H (mm)	1,620 x 1,190 x 1,592	1,620 x 1,205 x 2,000
Machine Weight (Kg)	550	650
Power Required (Kw)	1.5	1.5
Pile up/down Motor (Kw)	0.55	0.55
Drive Motor (Kw)	0.25	0.25

Major Equipment

Palletized Sheet Pile	Rear way delivery	Side jogger timing selection
Four conveyer belt	Air blow up device	Air blow sheet separator
		Delivery Mirror

Floor Plan

Model	Width A	Length B	Height C
PST 80	1,592 (mm)	1,620 (mm)	1,216 (mm)
PST 104	1,860 (mm)	1,637.5 (mm)	1,225 (mm)

The specifications given are as of February 2012 and are subject to further change for improvement.

Click on “Contact Us” for pricing and availability!

Contact

Sales

Service

Parts

Chris Brown: 440-339-5853

Bobby Longendyke: 614-638-9027

Raymond Ponce: 562-922-1435 (Bilingual/Spanish)

Armando Maldonado: 626-679-5351 (Bilingual/Spanish)

Gail Hughes: 614-365-1518

Natgraph’s Automatic Stackers

Sanjo Sales and Service

No Comments »

Natgraph’s Automatic Sheet Stackers
have been developed over many years
with 100’s of these units in daily use
world-wide.

Available in 7 standard sizes,
There are also purpose built versions for
high pile/high speed applications and special substrates.

Automatic Sheet Stackers
Continuous Operation Option
CCTV Stack Monitoring Systems

Click here to download the (4 page) specification .PDF file.

Click on “Contact Us” for pricing and availability!

Contact

Sales

Service

Parts

Chris Brown: 440-339-5853

Bobby Longendyke: 614-638-9027

Raymond Ponce: 562-922-1435 (Bilingual/Spanish)

Armando Maldonado: 626-679-5351 (Bilingual/Spanish)

Gail Hughes: 614-365-1518

DS-Series-stacker

Sanjo Sales and Service

No Comments »

The S.P.E. Inc. Descending Pile Stacker is intended solely for efficient stacking of most screen printed subtrates at high speeds.

– 24″ Pile Height – Overhead mirror with adjustable angle.
– Heavy duty D.C. adjustable belt speed.
– UL approved control panel.
– Carts with caster wheels.
– Automatic side and rear tampers.
– Fully adjustable left/right tampers.
– Six digit sheet counter.
– Built in safty system prevents tamper damage.
– Intermittent air blast for sheeet flotation with adjustable volume.
– Automatic descending mode with alarm to indicate full stack.
– Setup mode made for fast and accurate sheet positioning.

Optional Features

Custom sizes 12″-72″.
36″ pile height. (pile high)
Continuous non-stop stack feature.
Sheet cleaners.
Air flotation system for light weight stack.
Solid base plate

Contact

Sales

Service

Parts

Chris Brown: 440-339-5853

Bobby Longendyke: 614-638-9027

Raymond Ponce: 562-922-1435 (Bilingual/Spanish)

Armando Maldonado: 626-679-5351 (Bilingual/Spanish)

Gail Hughes: 614-365-1518

48″ UV Gas A/C Combo Dyer (used)

Sanjo Sales and Service

No Comments »

– (2) Lamp 200/300 watt Water Cooled UV Curing Unit
– (2) 12′ Foot heat sections each with 1.5 Million BTU burners
– (1) 10 Air conditioned cooling unit
– New Conveyor 48″ wide
– (2) New 48″ Mercury Vapor Lamps
– New Reflective Sheeting
– (2) New Temperature Controllers
– 6 Month Warranty

Dryer is raised to match a high pile Sakurai Press but can be lowered to 34″ standard pass line height.

(click on images to make them larger)

Contact

Sales

Parts

Chris Brown: 440-339-5853

Bobby Longendyke: 614-638-9027Raymond Ponce: 562-922-1435 (Bilingual/Spanish)

Armando Maldonado: 626-679-5351 (Bilingual/Spanish)

Gail Hughes: 614-365-1518

SC72A UV Line (used)

Sanjo Sales and Service

No Comments »

The Sakurai SC72A Press / Dorn SPE Curing Unit has a minimum sheet size of 10″ 5/8 x 13″ 1/4 with a maximum sheet size of 20″ 1/2 x 28″ 5/16 with an Print speed IPH (Impressions Per Hour) of 900 to 3600.

30″ (2) Lamp “Starlit” Dorn UV Curing unit air cooled

(200/300 Watt capability) Model# STARLIT 305-2/8AB

8′ feet of Ambient Cool

(12) Drawbar Frames included

New Conveyor Belt

(2) New 30″ Mercury Lamps